Tiny whoover EW65 FPV Hovercraft

Tiny whoover EW65 FPV Hovercraft RC Quadcopter Built-in Beecore V2.0 Flight Controller Another fun way to play with brushed Tiny Whoop. Let’s rock and drift.. You can also enjoy the FPV Experience with the FPV goggles. These nifty, little conversion kits work with your Tiny whoop electronics to transform it into a fully functional, super-fast hovercraft that works on almost any surface. Description: Item Name:Realacc Tiny Whoover EW65 FPV Racer Hovercraft RC Quadcopter Battery:3.8v 250mah Motor:615

AIO Camera&VTX: Output power: 25mw Frequency: 48CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Camera resolution: 700TVL Field of view: 120° Video Format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 6 bands 48 channels With Raceband: 5474 5945 MHZ Size: 13.9"12.0mm ( L*W ) Weight: 3g Flight Controller: CPU: STM32F303CCT6 Six-Axis: MPU6500 ESC: All FETs are rated at 10A maximum Work voltage: 3.5V-4.35V / 1S Lipo battery input Firmware Version: BETAFLIGHTF 3.2.0 Firmware Target: Omnibus OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Size: 26mm x 26mm (Fully compatible with the Inductrix quad and Eachine E010/E010S frame and mounting pattern.) Weight: 3.2g Receiver option: Frsky 8CH protocol D8 Mode (SBUS) Flysky 6CH AFHDS 2A protocol (IBUS) Spektrum DSM2/DSMX protocol Compatible: 1.Frsky Receiver Support FRSKY X9D/X9D PLUS(D8 mode),and XJT (D8 Mode),DJT DFT DHT Transmitter. 2.Flysky Receiver Support Eachine i6, FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F, Turnigy Evolution Transmitter. 3.Spektrum DSM2/DSMX Receiver Support Spectrum/JR(DSM2/DSMX protocol) DEVO10/DEVO 7E(with deviation firmware). Package Included: Standard kit included: 1 x Frame Kit set 4 x 0615 brushed motor
4 x 31mm propeller 1 x Beecore v2.0 Flight controller (Option: Frsky receiver/Flysky receiver/DSMX receiver) 1 x 3.8v 250mah battery
1 x Battery Cables 1 x Lipo USB Charger 1 x LED 1 x 3M Double-sided adhesive
Advanced kit include: 1 x 5.8G 48CH 700TVL Camera
1 x Frame Kit set 4 x 0615 brushed motor 4 x 31mm propeller 1 x Beecore v2.0 Flight controller (Option: Frsky receiver/Flysky receiver/DSMX receiver) 1 x 3.8v 250mah battery 1 x Battery Cables 1 x Lipo USB Charger 1 x LED 1 x 3M Double-sided adhesive

• Хочешь погонять так же - читай обзор Самодельный СВП своими руками.


Tiny Whoover - Бюджетная постройка